We offer free layaway
AAC SR5 5.56 NATO Fast Attach
The SR-5™ is an evolutionary fast attach silencer for 5.56mm hosts. Using a variant of the AAC 90 Tooth Ratchet Taper™ fast-attach system, users are able to securely install or remove the silencer in less than three seconds using an intuitive motion and gross motor skills. The rock solid interface of the 90 Tooth Ratchet Taper™ system minimizes point-of-impact shift and enables users to fully explore the accuracy potential of their host weapon. Includes 90T 1/2x28 Blackout® Flash Hider Mount. The durable, fully-welded 100% Inconel® 718 baffle core of the SR-5™ is designed to minimize back pressure and feature a newly designed blast baffle that provides additional erosion resistance for use with short barreled hosts.
Caliber: 5.56 NATO Weight: 17.5 oz Length: 6.7" Diameter: 1.50" Finish: Cerakote™ Sound Reduction: 32-34dB* Mount: 90T Ratchet Taper Mount™; 90T 1/2x28 Blackout® Flash Hider Mount Materials: Inconel® 718, 316L SS
Blackhawk Barrage 5.56MM
BLACKHAWK! BARRAGE™ SOUND SUPPRESSOR •Approved Calibers: 5.56NATO, .223Rem, & .22-250Rem •Minimum Approved Barrel Length: 5.56NATO (10"), 22-250Rem (12") •Performance: 5.56mm (136.2 dB) •Skived hex pattern enhances grip •Materials: Stellite™, Stainless steel, & Type 3 hardcoat anodized aircraft-grade aluminum •Perimeter-welded stainless steel & Stellite™ baffle stack •Turbine™ End Cap helps direct gas downrange, away from shooter •Includes the integrated QD mount, QD 1/2x28 flash hider, Universal BLACKHAWK!® Suppressor Tool, & Rocksett™ thread locker •OAL: 6.5" •Diameter: 1.49" •Wt.: 12.6 oz.
Gemtech Shield 5.56MM
The GEMTECH SHIELD is our premier titanium Quickmount Extreme Duty suppressor. The SHIELD features an upgraded baffle stack with an Inconel blast baffle for increased durability on short barreled , full auto rifles. This enhancement allows our suppressor to pass the intense SOCOM Military standards. With the new insides, the outsides were upgraded to include the NEW GEMTECH logo endcap. Tested To SOCOM Military Standards. Caliber: 5.56MM NATO / .223. Sound Reduction: 32 dB. Full Auto Rated. Length: 7". Diameter: 1.5". Weight: 16.3 oz. Materials: Titanium & Inconel. Finish: High Temp Black Cerakote. Mount: Flash Hider (not included). For Barrels: 10.3" or Longer
Gemtech Trek 5.56 1/2x28 Black
The TREK is a compact and rugged threadmount suppressor for 5.56MM rifles and is suitable for full auto and shorter barrel (10.3" or greater) carbines. The TREK is made of rugged 17-4 stainless steel, with non-welded construction. The updated design allows for easy pinning to 11" or longer barrels to meet non-SBR overall length requirements.
Mount 1/2-28 (2A) Thread Mount
Material Stainless Steel
Full Auto Rated Yes
Finish Matte Black Cerakote with Reduced Visual-IR Signature
Gemtech Trek -T 5.56
The TREK-T, a 5.56mm titanium suppressor: Its tough construction is suitable for full auto and usage on modern, shorter barrel (10.3" or greater) carbines. The TREK-T weighs in at a featherweight 10.3 ounces - subtracting the couple ounces and inches of flash hider removed from the host rifle, this gives a net gain of only around 8 ounces - a small weight penalty to pay for OSHA safe hearing protection mounted on the weapon at all times! Caliber: 5.56mm NATO / .223. Sound Reduction: 29 dB. Length: 5.7". Diameter: 1.5". Weight: 10.3 oz. Materials: Titanium & Inconel. Finish: Matte Black Cerakote with Reduced Visual-IR Signature. Mount: 1/2-28 (2A) Ti Threads. For Barrels: 10.3" or Longer.
Gemtech Model Halo FDE 5.56
New and upgraded, the GMT-Halo is the shortest and lightest Halo so far, using an improved closer mechanism. The GMT-Halo can be used on the standard A2 birdcage style flash hider. Additionally, the KAC556 mount from Primary Weapon Systems can be used.
The GMT-Halo is easy to use and requires no modification to the host weapon. It utilizes a simple, patented, no-tools mounting system that slips over most NATO weapon 5.56mm flash hiders. There is no need for proprietary mounts or modifications to the barrel. The GMT-Halo may be swapped between many different weapons easily, including the M16, M4, HK416, and M249.
Mounting or removal can be performed without the use of tools in less than 30 seconds. The GMT-Halo is rated for barrels 10.3" or longer and fits A1/A2 flash hiders and includes a shim kit.
Griffin Armament Recce 5 5.56
The Recce 5 (MOD 3) is the compact 5.56mm little brother to the Recce 7. It is one of the lightest most durable, accurate, and high performance 5.56mm suppressors on the market. The Recce 5, weighs only 14.5 ounces on it's own and a mere 16.3 ounces as a suppressor system with the included Taper Mount Minimalist Brake. The included Taper Mount ensures minimal and repeatable point of impact shift with only minor weight gain. The Recce 5 achieves out of this world sound performance vs its size. Utilizing our Patent Pending Efficiency baffle technology this compact suppressor drops SPL by 35db on a 14.5" M4 while keeping gas block back to normal levels. To increase performance for military users a high efficiency low profile flash suppressor was integrated into the front of the suppressor. This feature reduces flash, providing minimal signature for the user in low light environments. Also new to the Recce 5 (MOD 3) is a tuned, Patent Pending baffle system offering the apogee of multi-caliber sound performance. Elite tactical units requested minimal flash signature and Griffin responded by developing a low-profile flash reducer integral to the suppressor. For users seeking a dual role suppressor that can run on both tactical carbines and precision varmint rigs this is the ticket. At 14.5 ounces the Recce 5 is extremely light on the end of the gun keeping your muzzle fast on target, and enabling fatigue free carry for extended periods of time. The Recce 5 is CNC machined, and TIG fusion welded for maximum thermal transfer and unparalleled strength and durability. Every component in the Recce 5 is manufactured from solid billets of strong, heat treated, high temperature corrosion resistant 17-4ph Stainless Steel. The Recce 5 suppressor has a precision bore ensuring maximum accuracy, as well as minimum, consistent, and repeatable POI shift. A Taper Mount Minimalist Brake is included making the Recce 5 a good value and a turn key suppressor system. Whether hunting your favorite game or rucking on a long range patrol the Recce 5 is the right tool for the job. Warrantied on Following barrel lengths: 5.56mm 7.5"+
Innovative Arms Grunt-M 5.56
At only 5” and 13.5oz, the Grunt-M (mini) is the most compact and lightweight in it’s class. The patented one piece core is machined from billet bar stock and has no internal welds. The GRUNT-M is direct-thread on in 1/2 x 28 and is full auto rated on barrels down to 10″. It also features wrench flats that allow easy pin and weld for short barrels and is available in Black, OD Green or Flat Dark Earth. As with all our silencers, the GRUNT-M can be fired “wet” or “dry”. Do not use a crush washer in conjunction with any Innovative Arms silencer. Caliber: 5.56. Weight: 13.5oz .Length: 5”. OD: 1.5″. Material: Stainless Steel. Finish: Black. TPI: 1/2 x 28.DB Reduction: 23-28 Dry.
FULL AUTO RATED
Comes with Exoskeleton Shroud
Knight's Armament Model 556 QDC/CQB 5.56 - Demo
Mfg# 556 QDC/CQB
The shorter Close Quarters Battle (CQB) line of Quick Disconect Coupling (QDC) Suppressors are designed for better maneuverability in confined spaces. The entire QDC line of suppressors are compatible with the KAC QDC muzzle devices, which come standard on all KAC rifles and are also available separately. These suppressors are currently in service with various SOF and LE agencies accross the country, and feature an innovative mounting method, providing the user with consistent and minimized POI shift, and effective flash and sound suppression. The attachment method separates the locking parts from mounting surfaces, making carbon build-up a reduced concern. Consistent POI shift is maintained through repetitive lock-up of the mounting hardware during attachment.
SureFire SOCOM556-RC2 5.56MM
The new and improved SureFire SOCOM556-RC2 Fast-Attach® suppressor is the most advanced 5.56 mm rifle suppressor ever made. Compact and lightweight, this suppressor was selected for the Mk18 and M4 by US Special Operations Command as first among all competitors in the most extensive and rigorous suppressor evaluation in history. This test covered all aspects of suppressor performance, and SureFire beat every other entry. It has also received the USSOCOM official safety verification in support of fielding. Constructed of advanced high-temperature alloys and stainless steel, the SOCOM556-RC2 features a more advanced internal venting to reduce back pressure, reducing the suppressed cyclic rate and gas blowback on the operator. The new design also includes an integrated blast shield in the back section that increases durability. The patent-pending front-plate design along with proprietary improvement in gas flow dynamics nearly eliminates first-round flash, a true technological breakthrough in this area. It also attenuates noise and dust signatures to an unprecedented degree. A new indexing system and computer controlled welding means this suppressor securely mounts to a SureFire muzzle brake or flash hider even more solidly than our previous models, and is easier to remove after extended firing since the index tab is in a low carbon-buildup area. Like all SureFire Fast-Attach models the SOCOM556-RC2 produces minimal, consistent shift in point of impact compared with the unsuppressed weapon. Features Advanced features based off the Winner of US Special Operations Command (USSOCOM) extensive and rigorous suppressor trials. USSOCOM official safety verification in support of fielding. Advanced internal venting to reduce back pressure, cyclic rate, and gas blowback. Integrated blast shield increases durability. Patent-pending front-plate design and proprietary gas flow improvements virtually eliminate first-round flash. Effective attenuation of noise and dust signatures. Patented Fast-Attach® design attaches and removes in seconds. Minimal and consistent point-of-impact shift. Lightweight and compact for minimal impact on weapon handling characteristics. Constructed of advanced high-temperature alloys and stainless steel. Long service life. Made in the USA
SureFire SOCOM556-MINI-BK 5.56MM
Caliber: 5.56 mm (.223 caliber). Length: 5.0 inches. Weight: 14.5 ounces. Diameter: 1.5 inches. The SOCOM556-MINI Fast-Attach® suppressor is shorter, lighter version of SureFire’s SOCOM556-RC, which was selected by US Special Operations Command as first among all competitors in the most extensive and rigorous suppressor evaluation in history, covering all aspects of suppressor performance, and which also received the USSOCOM official safety verification in support of fielding. With an overall length of just 5 inches, the SOCOM556-MINI is 1.2 inches shorter and 2.5 ounces lighter than the SOCOM556-RC. It features advanced internal venting to reduce back pressure, reducing the suppressed cyclic rate and gas blowback on the operator. The new design also includes an integrated blast shield in the back section that increases durability. SureFire’s patent-pending front-plate design, along with proprietary improvements in gas-flow dynamics, nearly eliminates first-round flash, a true technological breakthrough in this area. It also attenuates noise and dust signatures to an unprecedented degree. A new indexing system means it mounts to a SureFire muzzle brake or flash hider even more solidly than our previous models and is easier to remove after extended firing since the index tab is in a low carbon-buildup area. Like all SureFire Fast-Attach models, the SOCOM556-MINI produces minimal, consistent shift in point of impact compared with the unsuppressed weapon regardless of the number of attach-detach cycles. The SOCOM556-MINI is constructed from advanced US mill-certified high-temperature alloys and heat-treated stainless steel, and features a tough, corrosion-resistant Ionbond coating on the Fast-Attach® lock ring and Cerakote™ ceramic finish on the suppressor body, in either Black or Dark Earth color. All SureFire SOCOM Series suppressors require a compatible, latest-model SureFire muzzle brake/adapter or flash hider/adapter for attachment to a firearm. SureFire sound suppressors for rifles and machine guns combine every important suppressor feature: excellent sound, flash, and dust signature reduction—key components of SureFire's Total Signature Reduction™(TSR); minimal and consistent zero shift regardless of attach/detach cycles; rock-solid attachment in seconds; compact size; minimal weight; fail-safe baffles to prevent bullet side-exit; and extreme durability permitting full-time use. In fact, your SureFire suppressor should outlast your firearm barrel, depending on use. All SureFire Fast-Attach® sound suppressors provide crucial tactical benefits—they reduce the weapon’s sound signature, concealing operator's position and protecting both the operator and team members against both permanent and temporary hearing loss, while enhancing situational awareness and communication; reduce or virtually eliminate muzzle flash, concealing operator's position and preserving night vision and unobstructed view; reduce dust signature, concealing operator’s position and maintaining unobstructed view; and reduce recoil, improving bullet impact observation and allowing for faster follow-up shots. Features: Patented Fast-Attach® design provides rock-solid attachment and easy removal in seconds. Same revolutionary suppressor technology as SureFire’s SOCOM556-RC, winner of US Special Operations Command (USSOCOM) extensive and rigorous suppressor trials. Provides effective attenuation of sound and dust signatures. Minimal, consistent point-of-impact shift compared with unsuppressed weapon regardless of number of attach-detach cycles. Compact and lightweight for minimum overall weapon length and minimum impact on handling characteristics. Advanced core design to reduce back pressure, cyclic rate, and gas blowback. Patent-pending front-plate design and proprietary gas-flow improvements virtually eliminate first-round flash. Integrated blast shield increases durability. Constructed of advanced US mill-certified high-temperature alloys and stainless steel. Redundant-welded subcomponents eliminate parts loosening. Tough, corrosion-resistant Ionbond and Cerakote™ finish in Black or Dark Earth color.
Yankee Hill Machine Turbo 5.56 Stainless With 1/2-28" Q.D. Brake
The Turbo™ was designed to meet the increasing demand for a quiet, yet lightweight sound suppressor that won’t break the bank. As the current state of the suppressor industry grows and evolves, the demand for a high-tech, cost effective suppressor becomes more apparent. The new Turbo™ utilizes a tubeless design made from heat treated 17-4 stainless steel along with a heat treated 718 Inconel blast baffle. The combination of these materials allows the suppressor to be full auto rated and designed for rigorous use. The overall length measures 6.5” with a 1.5625” diameter -all while weighing in at a surprising 13.5 oz. Having an average sound pressure level of 134dB on a 14.5” AR shooting 55 grain ammo, the Turbo™ is well within the hearing safe threshold of 140 dB. Built with the same care, quality, and attention to detail that has defined the YHM®brand for generations. With an MSRP of $489 (which includes a Q.D. brake) the Turbo™ was created to supply the modern suppressor community with a full-featured suppressor at an affordable price. SPECIFICATIONS: Weight: 13.5oz. Diameter: 1.562”. Length: 6.5”. Construction: 17-4 Ph SS / Inconel. Mount: Q.D. Muzzle Brake. Decibel Rating: 134 dB.
Yankee Hill Machine Stainless Steel QD Phantom 5.56 1/2"x28
YHM, in cooperation with Sound Technologies, is proud to bring you the Phantom M2 Sound Suppression System. This suppressor features 300 Series Stainless Steel and Inconel 718 construction for increased strength, superior durability, and amazing weight savings. The proven performance of YHM's Phantom Flash Hider eliminates 99% of muzzle flash while the Sound Technologies baffle design (U.S. Patent #7,073,426) reduces muzzle noise by up to 35 dB. The fast attach design allows you to permanently install the Phantom Flash Hider and then install the Sound Suppressor without the use of tools when sound suppression is desired. Our Phantom Flash Hider system holds the sound suppressor firmly in place by hand tightening and allows the sound suppressor to be removed by hand when no longer needed. A gas seal keeps the threads clean so the suppressor will not bind, making removal a breeze. The Phantom Flash hider supports the sound suppressor in two places making misalignment nearly impossible, even if the sound suppressor is not fully tightened. Caliber: .223 / 5.56. Overall Length: 6.875 Inches. Diameter: 1.500 Inches. Weight: 18.5 Ounces. Suppression Level: -39 dB. Material: 300 Series Stainless and Heat Treated Inconel 718. Finish: Matte Black. Method of Attachment: Q.D. Flash Hider (or Muzzle Brake). Rating: .17HMR through 5.56mm. Full Auto Rated. Flash Hider Mount Thread Options: 1/2"-28, M15x1 RH, 9/16-24 LH, M13x1 LH, M13x1 RH. Muzzle Brake Mount Thread Options: 1/2"-28.